stroyturkey.com - Оборудование для производства окон из ПВХ и Алюминия


		НomePage		Site Map		Е-mail

турция, стамбул, строительное оборудование, оборудование, станок, станки, для производства окон, дверей, стеклопакетов, из пвх, из алюминия, для сварки углов, для шлифовки, для резки профилей, Аtlas, Antec, Yilmaz, Ozcelik, Ersan, Cms, Kaban, Murat, Puma, Bosch, компрессор, пневмотические инструменты, электрические, пневмоотвертка, отвертка, отвертки, шуруповерт, шуруповерты, пневмодрель, дрель, дрели, фрезы, фрезеры, пневмоболгарка, болгарка, болгарки, пистолеты, маслоотстойники, переходники, шланги, сверла






Machines "OZCELIK"	•
Machines "YILMAZ"	•
Machines "STC MACHINE"	•
Equipment for pro-on glazed unit	•
Compressors and air dryings	•
Pneumo-Devices and others	•

Workshop for production of PVC window	•
Workshop for production of Alum. window	•
Production Scheme	•

What is PVC?	•
Production organization for window	•
Technology for production of PVC GOODS	•
Теchnology for production of Aluminium GOODS	•
Теchnology fro production of Glazed UNITS	•
Requirements to the production apartments	•
Personnel for window production	•
Schemes of production lines	•
Cutting-Off Equipment	•
Milling Equipment	•
Welding of Profiles	•
Corner Cleaning	•
Appendix	•

Technology of production of wares from an aluminium

The production of wares from an aluminium type is broken on a few production areas:

area of purveyance
area of setting of uplotnitel'noy rubber;
area of setting of impostov, furnitury, and
assembling of good;
area of setting of steklopaketov and fillings.

Area of production

On this area the followings operations are made:

cutting of purveyances from an aluminium type. Made in obedience to the form of order. In the case of making of window frame and stvorochnyy types of narezayutsya under the corner of 45°. Impost of narezaetsya under the corner of 90°. taking into account a supply on ledges from every side. In the case of making of door overhead corners of vertical parts and overhead horizontal part of frame and leaf of narezayutsya are under the corner of 45°, and lower corners of vertical parts of frame and leaf and type of bottom of door of narezayutsya under the corner of 90°. Shtapiki of narezayutsya under the corner of 90°;

milling of butt ends of imposta and type of bottom of door (in the case of making of door) on a butt milling-end machine-tool;

пробивка на специальном вырубном прессе всех необходимых отверстий (дренажные отверстия, отверстия в створке для установки тяги, фурнитурной ручки, «сухарей»);

milling of openings under a larva and lock on entrance doors on a profiler;

blowing out of purveyances of types by the compressed air.

Area of setting of weather strip rubber

Setting of uplotnitel'noy rubber is made from the butt end of purveyance and then stretched out on all of length. A compression is cut under the corner of 45° (except for imposta).

Area of setting of furnitury, impostov and assembling of good

Assembling of constructions from the aluminium type of the system of SIPAR50 can be made two methods:

wringing of corners. In this case you may need an obzhimnoy press. In connection with that this machine-tool stands expensive enough, for beginnings producers the second method is comfortable;

connection of corners through «rusks» on skrutke.

Fastening of imposta to the frame is made through the special «rusk».

After assembling of construction (in the case of assembling of window) setting of furnitury is made. In a general view it looks so:

through the before cut through opening tractions of necessary sizes are led with the beforehand set connectors under a pen and tips;

on a leaf a furniturnaya handle is set (unlike pens for plastic windows, it can be either turning or turning-folding);

depending on the type of opening of window the complete set of furnitury is set (turning or turning-folding);

the timber elements of loops are inserted in a slot.

At assembling of doors of operation conducted in the following order:

on a leaf a lock and larva is set. In «easy» doors a lock is set in a cross-piece;

on a frame return part is set;

on a template the necessary for setting of loops openings are drilled in a frame and leaf;

loops are set on a frame and leaf;

connection of corners of frame and leaf is made.

After setting of furnitury a leaf and frame unite in a single construction. Compressions on corners prokleivayutsya the special glue.

Area of setting of steklopaketov and fillings

Setting of steklopaketov and fillings in wares from an aluminium type is made accordant TU. During setting of shtapikov utillize the special corners.